S1C63653 seiko epson corporation cmos 4-bit single chip microcontroller the S1C63653 is a microcomputer which has a high-performance 4-bit cpu s1c63000 as the core cpu, rom (4,096 words 13 bits), ram (512 words 4 bits), watchdog timer, programmable timer, time base counter, an lcd driver that can drive a maximum 32 segments 6 commons, sound generator and r/f converter built-in. the S1C63653 features low current consumption, this makes it suitable for battery driven portable equipment with r/f converter. features core cpu.................................................... 4-bit cmos core cpu s1c63000 osc1 oscillation circuit ............................ 32.768 khz (typ.) crystal oscillation circuit osc3 oscillation circuit ............................ 4 mhz (max.) ceramic (2 mhz max. when osc3 is used as the r/f converter operating clock) or 1.1 mhz (typ.) cr oscillation circuit ( ? 1) instruction set ........................................... basic instruction: 46 types (411 instructions with all) addressing mode: 8 types instruction execution time........................ during operation at 32.768 khz: 61 sec 122 sec 183 sec during operation at 4 mhz: 0.5 sec 1.0 sec 1.5 sec rom capacity ............................................ code rom: 4,096 words 13 bits data rom: 1,024 words 4 bits ram capacity............................................. data memory: 512 words 4 bits display memory: 48 words 4 bits input port.................................................... 8 bits (pull-down resistors may be supplemented ? 1) output port ................................................. 4 bits (it is possible to switch the 2 bits to special output ? 2) i/o port ....................................................... 8 bits lcd driver .................................................. 32 segments 6, 5, 4 or 3 commons ( ? 2) time base counter .................................... clock timer programmable timer................................... 16-bit pwm 1 ch. or 8-bit pwm 2 ch. ( ? 2) watchdog timer .......................................... built-in sound generator ........................................ with envelope and 1-shot output functions r/f converter.............................................. 2 c hannels, cr oscillation type, 20-bit counter supports resistive humidity sensors. external interrupt ....................................... input port interrupt: 2 systems internal interrupt ........................................ clock timer interrupt: 4 systems programmable timer interrupt: 4 systems r/f converter interrupt: 2 systems power supply voltage ................................ 2.4 to 3.6 v: max. 4 mhz operation in normal mode 2.4 to 3.6 v: 32 khz operation in halver mode 1.8 to 3.6 v: 32 khz operation in normal mode operating temperature range ................... -20 to 70c current consumption (typ.) ..................... low-s peed operation (osc1 = 32 khz crystal oscillation): during halt 3.0 v (lcd on, halver mode) 0.65 a during operation 3.0 v (lcd on, halver mode) 2.5 a high-speed operation (osc3 = 4 mhz ceramic oscillation): during operation 3.0 v (lcd on) 800 a shipping form............................................. chip (no polyimide) ? 1: can be selected with mask option ? 2: can be selected with software
S1C63653 2 epson block diagram osc1 osc2 osc3 osc4 com0~5 seg0~31 v dd v dda v c1 ~ 3 v d1 ~ 2 v osc ca~cd v ss v ssa k00~k03 k10~k13 test bz sen0, sen1, hud ref0, ref1 rfin0, rfin1 rfout reset p00~p03 p10~p13 r00~r03 core cpu s1c63000 rom 4,096 words 13 bits system reset control interrupt generator osc ram 512 words 4 bits data rom 1,024 words 4 bits lcd driver 32 seg 6 com power controller clock timer programmable timer/counter input port r/f converter i/o port output port sound generator
S1C63653 epson 3 pad diagram x y (0, 0) 4.00 mm 2.86 mm 1 5 10 15 20 25 30 35 40 45 50 55 60 65 70 die no. 75 80 85 89 chip thickness: 400 m pad opening: 90 90 m pad coordinates unit: mm no. pad name x y no. pad name x y no. pad name x y 1 com0 1.662 1.298 31 reset -1.751 1.298 61 p01 -0.084 -1.298 2 com1 1.552 1.298 32 seg16 -1.866 0.876 62 p02 0.026 -1.298 3 com2 1.442 1.298 33 seg17 -1.866 0.756 63 p03 0.137 -1.298 4 ca 1.332 1.298 34 seg18 -1.866 0.636 64 p10 0.247 -1.298 5 cb 1.222 1.298 35 seg19 -1.866 0.516 65 p11 0.357 -1.298 6 v c1 1.112 1.298 36 seg20 -1.866 0.396 66 p12 0.467 -1.298 7 v c2 1.002 1.298 37 seg21 -1.866 0.276 67 p13 0.578 -1.298 8 v c3 0.891 1.298 38 seg22 -1.866 0.156 68 r00 0.688 -1.298 9 v ssa 0.781 1.298 39 seg23 -1.866 0.036 69 r01 0.798 -1.298 10 rfout 0.668 1.298 40 seg24 -1.866 -0.084 70 r02 0.908 -1.298 11 rfin0 0.556 1.298 41 seg25 -1.866 -0.204 71 r03 1.019 -1.298 12 rfin1 0.442 1.298 42 seg26 -1.866 -0.324 72 bz 1.129 -1.298 13 ref0 0.332 1.298 43 seg27 -1.866 -0.444 73 v ss 1.239 -1.298 14 sen0 0.222 1.298 44 seg28 -1.866 -0.569 74 seg0 1.866 -0.968 15 ref1 0.112 1.298 45 seg29 -1.866 -0.694 75 seg1 1.866 -0.848 16 sen1 -0.001 1.298 46 seg30 -1.866 -0.819 76 seg2 1.866 -0.728 17 hud -0.150 1.298 47 seg31 -1.866 -0.944 77 seg3 1.866 -0.608 18 v dda -0.314 1.298 48 com3 -1.517 -1.298 78 seg4 1.866 -0.488 19 cc -0.424 1.298 49 com4 -1.406 -1.298 79 seg5 1.866 -0.368 20 cd -0.534 1.298 50 com5 -1.296 -1.298 80 seg6 1.866 -0.248 21 v d2 -0.644 1.298 51 v dd -1.186 -1.298 81 seg7 1.866 -0.128 22 v dd -0.756 1.298 52 k00 -1.076 -1.298 82 seg8 1.866 -0.008 23 v osc -0.868 1.298 53 k01 -0.966 -1.298 83 seg9 1.866 0.112 24 osc1 -0.978 1.298 54 k02 -0.856 -1.298 84 seg10 1.866 0.232 25 osc2 -1.088 1.298 55 k03 -0.745 -1.298 85 seg11 1.866 0.352 26 v d1 -1.201 1.298 56 k10 -0.635 -1.298 86 seg12 1.866 0.472 27 osc3 -1.311 1.298 57 k11 -0.525 -1.298 87 seg13 1.866 0.592 28 osc4 -1.421 1.298 58 k12 -0.415 -1.298 88 seg14 1.866 0.712 29 v ss -1.531 1.298 59 k13 -0.304 -1.298 89 seg15 1.866 0.832 30 test -1.641 1.298 60 p00 -0.194 -1.298 C C C C
S1C63653 4 epson pin description pin name pad no. i/o function v dd 22, 51 C power (+) supply pin v ss 29, 73 C power (C) supply pin v dda 18 C analog system power (+) supply pin (=v dd ) v ssa 9 C analog system power (C) supply pin (=v ss ) v d1 26 C internal logic system regulated voltage output pin v d2 21 C 1/2v dd voltage halver output pin v osc 23 C oscillation system regulated voltage output pin v c1 ~v c3 6C85 C lcd system power supply pin ca, cb 4, 5 C lcd system voltage booster capacitor connecting pin cc, cd 19, 20 C voltage halver capacitor connecting pin osc1 24 i crystal oscillation input pin osc2 25 o crystal oscillation output pin osc3 27 i ceramic or cr oscillation input pin (selected by mask option) osc4 28 o ceramic or cr oscillation output pin (selected by mask option) k00Ck03 52C55 i input port pins k10Ck13 56C59 i input port pins p00Cp03 60C63 i/o i/o port pins p10Cp13 64C67 i/o i/o port pins r00 68 o output port pin r01 69 o output port pin r02 70 o output port or tout output pin (selected by software) r03 71 o output port or fout output pin (selected by software) com0Ccom5 1C3, 48C50 o lcd common output pin (1/3, 1/4, 1/5 or 1/6 duty is selectable by software) seg0Cseg31 74C89, 32C47 o lcd segment output pin sen0 14 o r/f converter ch. 0 cr oscillation output pin sen1 16 o r/f converter ch. 1 cr oscillation output pin ref0 13 o r/f converter ch. 0 reference resistor cr oscillation output pin ref1 15 o r/f converter ch. 1 reference resistor cr oscillation output pin hud 17 o r/f converter ac-bias oscillation output pin for humidity sensor rfin0 11 i r/f converter ch. 0 cr oscillation input pin rfin1 12 i r/f converter ch. 1 cr oscillation input pin rfout 10 o r/f converter oscillation frequency output pin bz 72 o sound output pin reset 31 i initial reset input pin test 30 i testing input pin
S1C63653 epson 5 basic external connection diagram x'tal c gx cr c gc c dc r cr c 1 ? 8 c p c res crystal oscillator trimmer capacitor ceramic oscillator gate capacitor drain capacitor resistor for osc3 cr oscillation capacitor capacitor reset terminal capacitor 32.768 khz, c i (max.) = 34 k 5?5 pf 4 mhz (3.0 v) 30 pf 30 pf 30 k (2 mhz) 0.2 f 3.3 f 0.1 f note: the above table is simply an example, and is not guaranteed to work. ca cb cc cd reset v dda v dd v d1 v d2 v osc osc1 osc2 osc3 osc4 test v ssa v ss c 1 c 2 c 3 c 4 c 5 c gx c dc c res c p 2.4 v | 3.6 v + x'tal cr ? 1 ? 2 r cr seg0 | seg31 com0 | com5 c 6 c 7 c 8 lcd panel 32 6 ? 1: ceramic oscillation ? 2: cr oscillation (external r) c gc v c1 v c2 v c3 S1C63653 [the potential of the substrate (back of the chip) is v ss .] rfout sen0 ref0 rfin0 hud sen1 ref1 rfin1 c ad1 c ad2 r ref1 r tmp r ref2 r hud bz piezo coil k00?03 k10?13 p00?03 p10?13 r00 r01 r02 (tout) r03 (fout) input i/o output
http://www.epson.jp/device/semicon_e S1C63653 notice: no part of this material may be reproduced or duplicated in any form or by any means without the written permission of seiko ep son. seiko epson reserves the right to make changes to this material without notice. seiko epson does not assume any liability of any kind arisi ng out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no re presentation that this material is applicable to products requiring high level reliability, such as, medical products. moreover, no license to any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that anything made in accordance with this material wil l be free from any patent or copyright infringement of a third party. this material or portions thereof may contain technology or the subject rela ting to strategic products under the control of the foreign exchange and foreign trade law of japan and may require an export license from the ministry of economy, trade and industry or other approval from another government agency. ? seiko epson corporation 2007, all right reserved. seiko epson corporation epson electronic devices website semiconductor operations div ision ic sales dept. ic international sales group document code: 411220000 421-8, hino, hino-shi, tokyo 191-8501, japan issue september, 2007 phone: +81-42-587-5814 fax: +81-42-587-5117 printed in japan l
|
